Bob Smith Industries, BSI-131, Insta-Cure, Super Thin, Pocket CA Super Glue, 3/4 oz
- In stock, ready to ship
- Inventory on the way
Description
Bob Smith Industries, Insta-Cure, Super Thin, Pocket CA Super Glue, 3/4 oz,
BS-131
| Viscosity |
Super Thin |
|---|---|
| Foam Safe |
No |
| Bonding Time | 1-3 Seconds |
| Size |
3/4 oz. |
| Additional |
Eye and/or Nose Irritation, Not Foam Safe, Water Resistant |
| Odorless |
No |
| Product Type |
Cyanoacrylate |
| Brand |
Bob Smith Industries |
About
Pocket CAs are available in 3/4 & 4 oz. sizes and feature a top that has a pin built into the cap that covers the nozzle. This pin seals the bottle so that if it is tipped over, the bottle will not leak. This makes the Pocket CAs ideal for keeping in your tool or field box, just like our IC-Gel. This pin also helps prevent the clogging of the nozzle. One disadvantage that the new Pocket CA top has is the bluntness of the nozzle. This makes it more difficult to apply small amounts of the CA, especially in tight places. BSI's #304 extender tip can be used on the nozzle for finer applications. The Pocket CAs are available with BSI's Insta-Cure, Insta-Cure+, Maxi-Cure and Super-Gold+.
Uses
Works Best On:
- Balsa Wood
- Ceramics
Works Good On:
- Soft Wood
- Fiberglass
- Hard Plastics
- Water-Resistant
- CA Hinges
Directions
Unscrew top from nozzle. For finer applications, use the extender tip. Insta-Cure™ CA is used to bond tight fitting parts. Hold the parts together (sometimes using masking tape), then apply the Insta-Cure™ along the joints. The CA will penetrate deep into the joints. Bonding will occur in 1-3 seconds. Excess cured CA can be removed from surfaces like ceramics by rubbing with a paper towel soaked in Un-Cure™. Full strength is reached in two hours. Wipe the nozzle clean before replacing screw-on top. Refrigerate to extend shelf life. Cured CA is stable from -40 to 220º F. Soak extender tip in acetone for cleaning.
